Panasonic KX-TDA100 Getting Started page 22

4.3 Programming the Hybrid IP-PBX
Assigning the BRI Setting (Automatic Configuration)
22 Getting Started
7. When country/area data do not match:
a.
Click [OK] to replace the country/area data of
the Hybrid IP-PBX. Replacement may take
several minutes to complete.
b.
Follow the procedure described in "Starting the
Hybrid IP-PBX" and restart the Hybrid IP-PBX.
c.
Repeat steps 5 to 6 to restart the KX-TDA
Maintenance Console.
8. Follow the instructions of the wizard and assign the
basic items (Quick Setup).
The programme menu appears. You may now begin
programming the Hybrid IP-PBX.
a.
1.
Double-click "Configuration".
b.
Double-click "Slot".
c.
Change the status of the BRI card to OUS.
d.
Click [OK].