Confirm the ECO setting function. After selecting ON or OFF, press
③
and hold the function setting key
the ECO setting function is completed and the "ON" or "OFF"
below the "ECO" will light without flash.
Exit from the setting interface. Press and hold function setting
④
key
for more than 2 seconds, exit from the setting interface
and turn to main interface.
5.3.2 Bypass output setting
Enter the setting interface.Press and hold the function setting key
①
for more than 2 seconds, then come to setting interface, Press
and hold the function setting key
second(less than 2 seconds), select the function setting, choose
the bypass output interface, at the moment, the letters "bPS" will
flash as following:
for more than 2 seconds. Now,
for more than half a
18