Jacobsen HR-9016 Turbo Maintenance Manual page 87

Item Part No. Qty.
3006265
1
2 361117
3 2810702
4 48540-01
5 554748
6 4225760
4251726
7 400216
8 4228240
9 446134
10 443106
11 554748
12 3008820
13 400262
14 446140
15 452008
16 3009197
17 132647
18 443110
19 3003704
20 554748
21 4135918
22 441606
23 453023
24 446130
25 443102
26 441614
27 452006
28 446136
29 554748
30 4230960
4230980
31 554748
32 554748
33 4251808
34 4233781
35 4233780
36 554752
37 4138044
38 554752
39 4230820
40 400188
41 4251807
42 554748
Description
1 Tank, Fuel
3 Bushing
1 Valve, Needle
18 Clamp, Hose
AR Fuel Line, Tank to Sedimentor
1 Sedimentor
1 • Element, Sedimentor Filter
1 Screw, 5/16-18 x 2-3/4" Hex Head
1 Bracket, Sedimentor Mounting
1 Lockwasher, 5/16
4 Nut, 5/16-18 Hex
1 Fuel Line, Sedimentor to Pump
1 Clamp, Double Hose (5/8" O.D.)
1 Screw, 3/8-16 x 1" Hex Head
2 Lockwasher, 3/8
3 Flatwasher, 3/8
1 Bracket, Hose
1 Fuel Shutoff
1 Nut, 3/8-16 Hex
1 Valve, Overflow
1 Fuel Line, Tee to Tank
1 Pump, Fuel
1 Bolt, Carriage 1/4-20 x 3/4"
1 Flat Washer, 1/4
1 Lockwasher, 1/4 Heavy
1 Nut, 1/4-20 Hex
1 Bolt, Carriage 5/16-18 x 1"
1 Flat Washer, 5/16
3 Lockwasher, 5/16 Heavy
1 Fuel Line, Fuel Pump to Fuel Filter
1 Fuel Filter
1 • Cartridge, Filter Element
1 Fuel Line, Fuel Filter to Engine
1 Fuel Line, Engine to Tee
1 Tee, Hose
1 Washer
1 Bleeder
1 Fuel Line, Beeder to Check Valve
1 Check Valve, Fuel
1 Fuel Line, Check Valve to Tee
1 Bracket, Fuel Filter
2 Screw, 5/16-18 x 1" Hex Head
1 Connector, Hose
1 Fuel Line, Check Valve to Tee
Serial Numbers/Notes
See 25.1
10 Ft. Roll, Cut to Length, 5/16" I.D.
Included with Engine
10 Ft. Roll, Cut to 37", 5/16" I.D.
See 12.1, or 13.1
10 Ft. Roll, Cut to 85", 5/16" I.D.
Included with Engine
10 Ft. Roll, Cut to 49", 5/16 I.D.
Included with Engine
10 Foot Roll, Cut to 15.5", 5/16 I.D
10 Foot Roll, Cut to 10", 5/16 I.D.
Included with Engine
Included with Engine
Included with Engine
10 Foot Roll, Cut to 5", 3/16 I.D.
Included with Engine
10 Foot Roll, Cut to 2", 3/16 I.D.
See 35.1
Included with Engine
10 Foot Roll, CUt to 3", 5/16 I.D.
> Change from previous revision
HR-9016
87