20/30/40ILDV Fireplace Insert
FiReBOx cLeANiNG
•
Allow logs to cool completely before
cleaning. Logs reach high tempera-
tures.
•
Make sure clearances to combustibles
leave enough room for maintenance and
service.
•
carefully reassemble and reseal insert
properly after any cleaning or servic-
ing.
30
cLeANiNG and MAiNteNANce
1. Carefully remove log set, and embers from combustion
chamber.
2. Vacuum burner compartment thoroughly.
3. Vacuum any dust off logs.
4. Remove any lint from main burner and pilot.
5. Carefully replace log set, and embers in their correct
positions. Refer to Pages 18 through 21.
6. Replace door.
7. Relight pilot. Refer to Page 23.
8. Turn on main burners.
83D0524