Table of Contents
Advertisement
4.1.6.6
Johnson Tee installations (Washington State)
Drain pumps in installations with Johnson Tees (in Washington
State) must use stronger 4-vane pumps (# 184178 spade /
607468 Rast 5).
Standard 9-vane drain pumps (#
167082 spade / 642239 Rast 5) are
quieter and smoother than 4-vane
pumps. Older spade terminal pumps
had 6-vanes.
4.1.7
Water fill assembly
The water fill assembly is easily accessed from the left side by
just removing the left side panel. It can be a pressure-fill (with
diaphragm) or time-fill, depending on model.
4.1.7.1
Pressure fill
Pressure-fill assemblies use a diaphragm to accurately measure
water levels.
702_58300000148618_ara_en_a
During normal fill, rising water compresses air in a chamber until
the diaphragm operates when the proper water level is reached.
If water overfills, the float (shown in
and operates the drain pump. This float is connected to the float
in the base – either float operates the drain pump.
red
below) stops the water fill
Page 16 of 42
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SHE55P and is the answer not in the manual?
Questions and answers
table top mdel door hinge faulty
The provided context does not mention a door hinge issue specifically for the Bosch SHE55P tabletop model. However, it does describe potential misaligned or miswired door latches, which can cause the dishwasher to run with the door open or prevent it from closing properly.
If you suspect a faulty door hinge, checking for misalignment or latch wiring issues may help determine the cause.
This answer is automatically generated