Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for d&b audiotechnik E12
Summary of Contents for d&b audiotechnik E12
- Page 1 E12, E12-D Manual (1.2 EN)
-
Page 2: Table Of Contents
Please refer to the information in the operating manual. WARNING! Dangerous voltage! Contents Safety precautions..............3 Information regarding use of loudspeakers..........3 E12, E12-D ................4 Connections......................5 Operation with D6 or D12................5 Operation with E-PAC...................6 Dispersion characteristics................7 Altering the HF horn dispersion..............8 Technical specifications...................9 Manufacturer's declarations..........10... -
Page 3: Safety Precautions
Generally speaking, a distance of 0.5 m (1.5 ft) from magnetic data carriers (floppy disks, audio and video tapes, bank cards, etc.) is sufficient; a distance of more than 1 m (3 ft) may be necessary with computer and video monitors. E12, E12-D Manual (1.2 EN) Safety precautions - 1... -
Page 4: E12, E12-D
It is available in two different dispersion versions, the E12 providing a 80° x 50° dispersion pattern (hor. x vert.), the E12-D a wider 110° x 50° pattern. Both horns are easily rotatable through 90° without the use of tools, providing 50°... -
Page 5: Connections
Connections The E12 cabinet is fitted with a pair of EP5 connectors. All five pins of both connectors are wired in parallel. The E12 uses the pin assignments 1/2. Pins 3/4 and 5 are designated to active subwoofers, where pin 5 is used for SenseDrive (only available when using a D12 amplifier and 5-wire cabling). -
Page 6: Operation With E-Pac
Selecting E12 or E12-D mode enables the E-PAC to drive one E12 loudspeaker. LO IMP mode configures the E-PAC to drive a maximum of two E12 loudspeakers with a 6 dB reduction in input level to the loudspeakers. For acoustic adjustment the functions CUT and HFA can be selected. -
Page 7: Dispersion Characteristics
Dispersion characteristics The graphs below show dispersion angle over frequency of a single E12 cabinet plotted using lines of equal sound pressure (isobars) at – 6 dB and –12 dB. Fig. 6: Isobar diagram E12 horizontal, Fig. 7: Isobar diagram E12 vertical,... -
Page 8: Altering The Hf Horn Dispersion
- Pick the horn at its outer edges and turn it until it snaps into the desired orientation. - Relocate and fix the front grill. CAUTION: Make sure both quick locks of the front grill are locked correctly before using the loudspeaker. E12, E12-D Manual (1.2 EN) Page 8 of 10... -
Page 9: Technical Specifications
Frequency response (–5 dB standard)..........50 Hz ... 18 kHz Frequency response (–5 dB CUT mode)..........100 Hz ... 18 kHz Max. sound pressure (1 m, free field) E12/E12-D with D12....134/133 dB Max. sound pressure (1 m, free field) E12/E12-D with D6....131/130 dB (SPLmax peak, pink noise test signal with crest factor of 4) Input level (100 dB-SPL/1 m).................–17 dBu... -
Page 10: Manufacturer's Declarations
Manufacturer's declarations EU conformity of loudspeakers (CE symbol) This declaration applies to E12/E12-D loudspeaker, Z0601/Z0602 manufactured by d&b audiotechnik GmbH. All production versions of these types are included, provided they correspond to the original technical version and have not been subject to any later design or electromechanical modifications.
Need help?
Do you have a question about the E12 and is the answer not in the manual?
Questions and answers