Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for d&b audiotechnik E3
Summary of Contents for d&b audiotechnik E3
- Page 1 Manual (3.1 EN)
-
Page 2: Table Of Contents
Please refer to the information in the operating manual. WARNING! Dangerous voltage! Contents Safety precautions...............3 Information regarding use of loudspeakers..........3 E3 ..................4 Connections......................4 Operation with D6 or D12................5 Operation with E-PAC..................5 Operation with P1200A..................6 Dispersion characteristics.................6 Altering the HF horn dispersion..............7 Technical specifications..................7... -
Page 3: Safety Precautions
Generally speaking, a distance of 0.5 m (1.5 ft) from magnetic data carriers (floppy disks, audio and video tapes, bank cards, etc.) is sufficient; a distance of more than 1 m (3 ft) may be necessary with computer and video monitors. E3 Manual (3.1 EN) Safety precautions - 1... -
Page 4: Connections
Swapping the connector and blank plates 2– The connector plate is fitted to the E3 rear panel. Next to it, on the left hand side panel, is a metal blank plate with the cabinet details and Fig. 2: Wiring of the NL4 connectors serial number. -
Page 5: Operation With D6 Or D12
Select the controller setup E3. Within the D12 amplifier this is available in "Dual Channel" and "Mix TOP/SUB" mode. Up to a total of four E3 loudspeakers can be driven by each D6 or D12 amplifier channel. Controller settings For acoustic adjustment the functions CUT, HFA and CPL can be selected. -
Page 6: Operation With P1200A
Operation with P1200A Up to four E3 cabinets can be driven by each P1200A power amplifier channel fitted with an E3 controller module. Fitting one E3 and one subwoofer controller module allows a single mainframe to drive four E3s and two active subwoofer cabinets. All cabinets can be linked... -
Page 7: Altering The Hf Horn Dispersion
Altering the HF horn dispersion The E3 HF horn can be rotated through 90°. Two dispersion angles, 90° and 60°, are engraved on the flange. The value on the horizontal edge indicates the loudspeaker's horizontal dispersion angle. Tools required: Phillips screwdriver, 3 mm Allen key. -
Page 8: Manufacturer's Declarations
Manufacturer's declarations EU conformity of loudspeakers (CE symbol) This declaration applies to: d&b E3 loudspeaker, Z0300 manufactured by d&b audiotechnik GmbH. All production versions of this type are included, provided they correspond to the original technical version and have not been subject to any later design or electromechanical modifications.
Need help?
Do you have a question about the E3 and is the answer not in the manual?
Questions and answers