Generally speaking, a distance of 0.5 m (1.5 ft) from magnetic data carriers (floppy disks, audio and video tapes, bank cards, etc.) is sufficient; a distance of more than 1 m (3 ft) may be necessary with computer and video monitors. E0 Manual (3.0E) Safety precautions - 1...
Page 4
The E0 is a compact, coaxial 2-way loudspeaker fitted with a 5” LF driver and 1” dome tweeter and has a maximum sound pressure level of 116 dB SPL. The E0 is housed in a cleverly shaped strong polyamide cabinet containing magnetic shielding of the LF driver, and has a rigid metal grill that protects the front of the loudspeaker.
Page 5
Selecting E0 mode in the E-PAC enables up to two E0 cabinets to be driven at full output power. LO IMP mode allows the E-PAC to drive a maximum of four E0 cabinets with a 6 dB reduction of input level to the loudspeakers.
Page 6
Dispersion characteristics Due to the coaxial driver design, the horizontal and vertical dispersion characteristics of the E0 are identical. The diagram below shows dispersion angle vs frequency plotted using lines of equal sound pressure (isobars) at –6 dB and –12 dB.
Connections..........Push connector, two pairs wired in parallel corss-section up to 6 mm ............................2 x NL4 Pin assignments..............Push connector red+/black– ..........................NL4 1+/1– Weight......................2.5 kg (5.5 lb) 45 [1.77"] 170 [6.69"] 233 [9.17"] Fig. 8: E0 cabinet dimensions in mm [inch] E0 Manual (3.0E) Page 7 of 10...
Page 8
32 to 50 mm (1.25" to 1.97"). - The Z5035 M10 to 3/8" adapter enables the E0 to be mounted to a microphone stand, whilst the Z5034 Stand adapter allows the E0 to be mounted to a loudspeaker stand.
Page 9
Assembly The E0 ´s ball joint with integrated mounting arm incorporates an M10 female thread which enables the attachment of the accessory items as listed above. The specific accessories are attached to the mounting arm [1] using the spring washer [2] and should be fixed using a wrench (SW: #17).
EU conformity of loudspeakers This declaration applies to loudspeakers manufactured by d&b audiotechnik AG and includes the types listed in the table below: - E0 loudspeaker Z0400 All production versions of these types are included, provided they correspond to the original technical version and have not been subject to any later design or electromechanical modifications.
Need help?
Do you have a question about the E0 and is the answer not in the manual?
Questions and answers