Service Mode Procedure - Panasonic FP-7818 Service Manual & Parts Manual

(2) Service mode procedure

F1 appears in the display when the service mode is first turned ON.
Multi-
Mode Copy Item Function
key
F1 1 Display When the Print key is pressed,
check all displays light up.
F2 2 1. One sheet is copied when
Single
sheet the Print key is pressed.
copying
2. Duplex mode (1 sided
original, 2 sided copy or 2
sided original, 2 sided copy)
a. Select the 1 sided original 2
sided copy or 2 sided
original, 2 sided copy mode.
b. One sheet is copied when
the Print key is pressed. The
first side is copied and fed
into the duplex unit tray.
c. When the Print key is
pressed again, the second
side is copied and fed to the
copier exit tray.
d. Repeat procedures b) and
c).
3. Book original, 2 sided copy
mode.
a. Select the Book original, 2
sided copy mode.
b. One sheet is copied normally
when the Print key is
pressed.
c. When the Print key is
pressed again, One sheet is
copied and fed into the
duplex unit tray.
d. When the Print key is
pressed again, the second
side is copied and fed to the
copier exit tray.
5-2
Remarks
It stops when the Clear/Stop
key is pressed.
1. For both F2 and F3 the total
and electronic counter are
disabled.
2. When in F3, press the
Clear/Stop key to stop the
copy process.
3. In F2 and F3 with paper in
the drawer the misfeed
circuit is enabled.
4. If no paper is in drawer, the
misfeed circuit is disabled.
5. In both F2 and F3, the ADF
and Sorter can operate.
(To be continued)