Paper Jam - Panasonic FP-7818 Service Manual & Parts Manual

2.

Paper Jam

Jam
read Condition
code
J00 The registration roller paper pass sensor does not detect
paper within a predetermined time after sheet bypass paper feed
roller starts rotating.
J01 The copier upper paper feed unit paper pass sensor 1 does not
detect paper within a predetermined time.
When the duplex unit is not installed:
After copier upper stage paper feed roller starts rotating.
When the duplex unit is installed:
After duplex unit paper feed roller starts rotating.
J02 The copier lower paper feed unit paper pass sensor 2 does not
detect paper within a predetermined time after copier lower stage
paper feed roller starts rotating.
J03 Optional system console upper paper feed unit paper pass sensor 1
does not detect paper within a predetermined time after upper
stage paper feed roller starts rotating.
J04 Optional system console middle paper feed unit paper pass sensor 2
does not detect paper within a predetermined time after middle
stage paper feed roller starts rotating.
J05 Optional system console lower paper feed unit paper pass sensor 3
does not detect paper within a predetermined time after lower
stage paper feed roller starts rotating.
J06 When optional LCC is installed.
The copier lower stage paper pass sensor 2 does not detect paper
within a predetermined time after LCC pick-up roller starts
rotating.
J07 Paper feeding from the copier lower paper tray or optional
LCC or system console:
The copier upper stage paper pass sensor 1 does not detect paper
within a predetermined time after copier lower stage paper pass
sensor detected paper.
J08 Paper feeding from the optional system console upper stage:
The copier lower stage paper pass sensor 2 does not detect paper
within a predetermined time after optional system console upper
stage paper pass sensor 1 detected paper.
J09 a) Paper feeding from the optional system console middle stage:
The copier lower stage paper pass sensor 2 does not detect paper
within a predetermined time after optional system console middle
stage paper pass sensor 2 detected paper.
b) Paper feeding from the optional system console lower stage:
The copier lower stage paper pass sensor 2 does not detect paper
within a predetermined time after optional system console lower
stage paper pass sensor 3 detected paper.
J10 Not used
J11 The copier upper stage paper pass sensor 1 is detecting paper within
a predetermined time.
a) Paper feeding from copier upper stage:
b) Paper feeding from duplex unit:
5-40
Jam
position
A
A
A, E
A
B
B
B
A
A
A, B
B
A
A, E