Panasonic FP-7818 Service Manual & Parts Manual page 49

1) Replacement of the pick-up roller/paper feed roller
1
1 3
2
7
6
1
4
3
2
SV103
2) Replacement of the DFP roller and torque limiter
3
3
1
2
(1)Remove the screws and covers. (x 2)
(2)Disconnect the harness.
(3)Remove the bypass tray.
2
Note: Remove right cover (2 screws).
1
(1)Remove the touch ring.
(2)Remove the paper stopper.
(3)Remove the sensor lever.
(4)Remove the touch ring.
(5)Remove the pick-up roller
(6)Remove the touch ring.
(7)remove the paper feed roller.
*Conduct the procedure 1.
*Open the copier paper feed cover.
(1)Press the DFP roller lower side then
remove touch ring.
(2)Remove the DFP roller.
(3)Remove the torque limiter.
(4)Check the rotation of the torque limiter.
4-9