SECTION 3.
REMOVING THE FRONT PANEL
1) Remove [DIAL] from the front panel.
2) Remove 2 hex screws from the front panel.
[DIAL]
Hex screws
3) CAREFULLY separate the front panel from the
chassis.
4) Disconnect the fl at cable from the LOGIC UNIT.
BE CAREFUL about the fl at cable and connector when
separating the front panel from the chassis.
FLAT
CABLE
W2
DISASSEMBLY INSTRUCTION
Front panel
Chassis
Front panel
REMOVING THE MAIN UNIT
1) Remove 8 screws from the top cover, and then re-
move the top cover from the chassis.
Top cover
2) Disconnect the fl at cable from the MAIN UNIT.
3) Disconnect the speaker cable from the MAIN UNIT.
4) Remove the speaker and speaker cap from the
MAIN UNIT.
SPEAKER
CABLE
MAIN UNIT
MAIN UNIT
MAIN UNIT
FLAT
CABLE
3 - 1
Screws
Chassis
Speaker
W2
Speaker cap
W2
W2
Chassis
(Continued on page 3-2.)