Specifications - Icom IC-2300H Service Manual Addendum

SECTION 1.
M GENERAL
• Frequency coverage
USA
Export
Taiwan, Korea
*Guaranteed: 144–148 MHz range only.
• Type of emission
• Number of memory channels : 207 (incl. 6 scan edges and 1 Call)
• Scan types
• Frequency resolution
• Operating temperature range : –10°C to +60°C; +14˚F to +140˚F
• Frequency stability
• Power supply requirement
• Current drain
(at 13.8 V DC: approximately)
Transmit
Receive
• Antenna connector
• Dimensions
(proj. not included)
• Weight (approximately)
All stated specifi cations are subject to change
without notice or obligation.

SPECIFICATIONS

: (unit: MHz)
Tx: 144–148/Rx: 136–174*
Tx: 136–174*/Rx: 136–174*
Tx/Rx: 144–146
: FM
: Full, Program, Priority, Memory
channel, Bank, Skip, Tone scans
: 5, 6.25, 10, 12.5, 15, 20, 25, 30,
50 kHz
: ±3 ppm
(–10°C to +60°C)
: 13.8 V DC ±15%
:
at 65 W 11 A
( less than 9 A at 24 W for the Taiwan
version)
standby 0.4 A
max. audio 1.5 A
(50 Ω)
: SO-239
: 140.0(W)×40.0(H)×118.0(D) mm;
5.5(W)×1.6(H)×4.6(D) in
: 1.1 kg; 2.4 lb
M TRANSMITTER
• Modulation system
• Output power
(approximately) :
High:
Mid:
Mid-Low:
Low:
• Max. frequency deviation
• Spurious emissions
• Microphone connector
M RECEIVER
• Receive system
• Intermediate frequencies
• Sensitivity
(at 12 dB SINAD)
• Squelch sensitivity
• Selectivity
[Wide]
[Narrow]
• Spurious and image rejection : More than 60 dB
• AF output power
(at 13.8 V DC)
• External speaker connector : 3-conductor 3.5 (d) mm (
1 - 1
: Variable reactance frequency mod.
USA, Export Taiwan Korea
65 W 24 W 50 W
25 W 10 W 25 W
10 W – 10 W
5 W 5 W 5 W
: ±5.0 kHz (Wide)/±2.5 kHz (Narrow)
: Less than –60 dBc
(600 Ω)
: 8-pin modular
: Double-conversion superheterodyne
: 1st: 46.35 MHz, 2nd: 450 kHz
: Less than 0.18 µV
: Less than 0.13 µV (threshold)
:
More than ±6 kHz/6 dB
Less than ±14 kHz/60 dB
More than ±3 kHz/6 dB
Less than ±9 kHz/55 dB
: More than 3.5 W (4.5 W typical)
(at 10% distortion with a 4 Ω load)
inch)/4 Ω
1
/
8