Using The Base Unit Phonebook (When Connected To A Base Unit Other Than The Kx-Tgp600 Only) - Panasonic KX-TGP600 Operating Instructions Manual

Using the Base Unit Phonebook (when connected to a base
unit other than the KX-TGP600 only)
Storing an Item in the Base Unit Phonebook
Storing a New Item
1. /
MENU
2. [D]/[C]/[F]/[E]:
3. [D]/[C]: "Base Phonebook" a
4. Enter a name (max. 24 characters). a
5. [D]/[C]: Select a phone number type (A to C
6. Enter the phone number (max. 32 digits). a
7. Repeat steps 4 and 5 to add additional phone number types.
8.
SAVE
*1 If the phonebook cannot be registered, "Unavailable" is displayed.
*2 You can register up to 2 phone numbers per item.
Note
R The valid digits are "0" through "9", "G", "B", "J".
R If an item with the same name and number exists, the new information added will be merged with the
existing item.
R To enter characters, see "Entering Characters", Page 44.
Editing Stored Items in the Base Unit Phonebook
[In standby mode]
1.
2. [D]/[C]: "Base Phonebook" a
3. Enter the name or the first character(s) of the desired name. a
4. [D]/[C]: Select the desired item. a
5. [D]/[C]: Select the desired phone number. a
6. [D]/[C]: "Edit" a
OK
7. Edit the name and phone number setting as necessary.
8.
SAVE
Deleting Stored Items in the Base Unit Phonebook
Base unit Phonebook
[In standby mode]
1.
2. [D]/[C]: "Base Phonebook" a
3. Enter the name or the first character(s) of the desired name. a
a
OK
OK
OK
OK
*1
OK
*2
). a
OK
OK
/
MENU
OK
Using the Phonebook
OK
OK
69