Call Waiting - Panasonic KX-TGP600 Operating Instructions Manual

3. Press the dial key, or press [D] or [C], and then press
corresponds to the party you want to disconnect.
4. KX-TPA60:
a /[LINE]
KX-TPA65:
On-hook a /[LINE]
5. Press the dial key, or press [D] or [C], and then press
corresponds to the remaining party.
Note
R To reestablish the conference without removing either party, press
"Conference" after step 3.
Ending a Conference Call
To go on-hook and end the conference call,
KX-TPA60:
press .
KX-TPA65:
On-hook
Mute
You can disable the microphone or the handset to consult privately with others in the room while listening
to the other party on the phone through the speaker or the handset.
To set/cancel
1. /
MUTE
Note
R When /
MUTE
If the /
MUTE
LCD.
R During Mute, even if you switch from/to speakerphone, Mute will continue.
R During Mute, even if you connect/disconnect a headset, Mute will continue.
R When using a KX-TPA65,

Call Waiting

During a conversation, if a second call arrives, you will hear a call waiting tone. You can answer the
second call by disconnecting or holding the current call.
This is an optional telephone company service. You can receive a call waiting tone and the caller's
information. For details, contact your phone system dealer/service provider.
To disconnect the current call and then talk to the new party
[While hearing the call waiting tone]
1. KX-TPA60:
KX-TPA65:
On-hook
is blinking, Mute is on.
soft key is not displayed on the LCD,
/[MUTE] can also be used.
During a Conversation
to select the LINE number that
OK
to select the LINE number that
OK
/[FUNC]/[FUNCTION], and then
/MUTE is displayed on the 1st line of the
59