Charging The Batteries - Panasonic KX-TGP600 Operating Instructions Manual

Installation and Setup
R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not
connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to
become disconnected.
R Fasten the AC adaptor cord to the cord holder.
R Use only the included Panasonic AC adaptor.
Battery Installation
Open the battery cover, insert the batteries, and close the cover as indicated below.
Attaching the Belt Clip
You can attach the handset to your belt by following the steps below.
1. Push the clip onto the back of the handset.
2. Insert the clip into the designated notches in the handset.

Charging the Batteries

At the time of shipment, the batteries are not charged. Please charge the batteries for about 6 hours
before using the handset for the first time.
82
R The charge indicator will turn off when the batteries are fully charged.
For more information about charging batteries, see "Battery Information",
Page 11.
R It is normal for the handset and charger to feel warm while the batteries are
charging.
R Keep devices sensitive to magnetic fields away from the charger.
R Use only the included charger.