Panasonic KX-TGP600 Operating Instructions Manual page 98

Appendix
System Setting Menu Layout (when connected to the KX-TGP600)
Status
Sub Item
Line Status
Firmware Version
IP Mode
IPv4 Settings
IPv6 Settings
MAC Address
LLDP
VLAN
*1 If this item is not set, "0.0.0.0" is displayed. If the base unit does not connect to the Ethernet, "..." is
displayed.
*2 If this item is not set, "0::0" is displayed. If the base unit does not connect to the Ethernet, "::" is
displayed.
Network Settings
Sub Item
IP Mode Select
IPv4 Settings
98
Description
Displays the line status.
Selects which is shown on the
display the model number and
the firmware version.
Displays the IP network mode.
Displays the information about
IPv4 settings.
Displays the information about
IPv6 settings.
Displays the MAC address of
the base unit.
Display LLDP status.
Display VLAN ID and priority.
Description
Changes the network settings
of the base unit. Current
settings are displayed as a
highlight.
Specifies the IPv4 settings.
Setting
Registered/Registering/
(NULL)
–Base Station
–Handset
IPv4/IPv6/IPv4&IPv6
*1
–IP Address
*1
–Subnet Mask
*1
–Default Gateway
*1
–DNS
*2
–IP Address
*2
–Prefix
*2
–Default Gateway
*2
–DNS
—
On/Off
—
Setting
–IPv4
–IPv6
–IPv4&IPv6
DHCP
Auto
Manual
–DNS 1
–DNS 2
Static
–IP Address
–Subnet Mask
–Default Gateway
–DNS 1
–DNS 2
Default
—
—
—
—
—
—
—
—
Default
IPv4
DHCP–Auto