Wall Mounting - Panasonic KX-TGP600 Operating Instructions Manual

Wall Mounting

Note
R Make sure that the wall and the fixing method are strong enough to support the weight of the unit.
KX-TGP600 (Base unit)
1. Drive the screws into the wall either 55 mm (2 5/32 in) apart, and mount the unit on the wall.
*1 55 mm (2 5/32 in)
*2 Washer
*3 Drive the screw to this point.
KX-TPA65 (Desk phone)
1. Connect the handset cord.
2. Insert the tabs of the wall mounting adaptor into the designated openings in the base, and then slide
the wall mounting adaptor in the direction of the arrow until it clicks.
3. Fasten the wall mounting adaptor to the base with the screw.
(Recommended torque: 0.4 N·m [4.08 kgf·cm/3.54 lbf·in] to 0.6 N·m [6.12 kgf·cm/5.31 lbf·in])
4. Connect the AC adaptor.
*1
*2
*3
Installation and Setup
83