Table of Contents
Advertisement
Before Initial Use
Charging the Batteries
At the time of shipment, the batteries are not charged. Please charge the batteries for
about 7 hours before using the handset for the first time.
Charger Wall Mounting
1. Install the two screws in the wall, spacing them 25 mm apart.
2. Mount the charger securely on the wall.
•
Please copy this page and use as a reference for wall mounting.
Make sure to set the print size to correspond with the size of this page. If the dimension
of the paper output still deviates slightly from the measurement indicated here, use the
measurement indicated here.
•
When mounting the charger, ensure that the correct screws are used for the type of wall.
•
Make sure that the wall that the charger will be attached to is strong enough to support
the total weight of the handset and charger (approx. 190 g). If not, it is necessary for the
wall to be reinforced.
•
When this product is no longer in use, make sure to detach it from the wall.
•
When inserting screws, avoid pipes and electrical cables, etc, that may be present/
buried.
•
The screw heads should not be flush to the wall.
•
Certain types of wall may require plugs to be anchored in the wall before the screws are
inserted.
6
•
When the batteries are fully charged, the charge
indicator goes off and "Fully charged" is displayed.
For more information, see "Battery Information" on
page 53.
•
It is normal for the handset and charger to feel warm
while the batteries are charging.
•
Keep devices sensitive to magnetic fields away from the
charger.
•
Use only the included charger.
25 mm
Screws
(Not supplied)
20 mm or longer
Recommended screw size is
•
M4 x 20.
Space
(2 mm)
Advertisement
Table of Contents
