Toshiba e-STUDIO167 Service Manual page 76

(C) Misfeed in equipment
• Exit sensor detects jamming of the leading edge of paper.
È
Registration clutch ON
Less than 1.808 sec.
È
Exit sensor ON
If the exit sensor is not turned ON after 1.808
sec.
È
Paper jam (E01) Æ The copying operation is
stopped.
• Exit sensor detects jamming of the tailing edge of paper.
È
Registration clutch OFF
Less than 1.759 sec.
È
Exit sensor OFF
If the exit sensor is not turned OFF after 1.759
sec.
È
Paper jam (E02) Æ The copying operation is
stopped.
• Immediately after the power ON
È
Any of all sensors on paper transport path detects paper (ON)
È
Paper jam (E03)
• Front cover is opened during copying
È
Paper jam (E41)
• The registration sensor (S4) is not turned ON in a fixed period of time when paper is fed out of the
ADU.
È
Paper jam (E11)
e-STUDIO167/207/237
GENERAL OPERATION
Registration clutch
Exit sensor
Timer
Registration clutch
Exit sensor
Timer
© February 2007 TOSHIBA TEC CORPORATION All rights reserved
4 - 8
ON
ON
0
1.808sec.
Paper jam (E01)
Fig. 4-1
OFF
ON
0
1.759sec.
Paper jam (E02)
Fig. 4-2