Toshiba e-STUDIO167 Service Manual page 250

[D] Upper transport roller
(1) Take off the ADU.
P.14-12 "[A] Automatic Duplexing Unit
(ADU)"
(2) Take off the ADU motor.
P.14-13 "[C] ADU motor (M8)"
(3) Remove 2 E-rings, 2 pulleys and 2 pins, and
then take off the timing belt.
(4) Remove 1 E-ring, 1 gear and 2 bushings,
and then take off the upper transport roller.
[E] Lower transport roller
(1) Take off the ADU.
P.14-12 "[A] Automatic Duplexing Unit
(ADU)"
(2) Remove 2 E-rings, 2 pulleys and 2 pins, and
then take off the timing belt.
e-STUDIO167/207/237
AUTOMATIC DUPLEXING UNIT (ADU) (OPTION: MD-0103)
Pin
Upper transport roller
E-ring
Gear
Pin
© February 2007 TOSHIBA TEC CORPORATION All rights reserved
14 - 14
Belt
Pulley E-ring
Fig. 14-14
Bushing
Bushing
Fig. 14-15
Belt
Pulley E-ring
Fig. 14-16
Pulley
Pulley