Event Settings - LG LNU3110R Owner's Manual

Maximum RTP stream connection
> Maximum number of simultaneous stream connection:
Set this number to limit the number of simultaneous stream
connections.
The connections depend on the stream configuration as
shown in the following Maximum RTP stream connection by
stream configuration.
- LND3110R / LNU3110R only
Video
Resolution
Codec
H.264 1280 x 1024
MJPEG 1280 x 1024
- LND3210R / LNU3210R / LND3220R / LNU3220R only
Video
Resolution
Codec
H.264 1920 x 1080
MJPEG 1920 x 1080
Note:
• Preview window of the IP device setting and preset
setting are affected by this setting.
• The video streaming may appear poor at times, this may
be because of the network traffic, too many devices
connected to the switch or hub, enabling motion
detection to each of the video streams and because of
other programs running on your computer.
• Save: Click this button to confirm the settings.
Operation and settings
Frame Maximum RTP
Rate stream
30 Up to 10
5 Up to 5
Frame Maximum RTP
Rate stream
30 Up to 10
10 Up to 10

Event settings

Event Server
Event Servers are used to receive the recorded video clip and/or
notification messages.
FTP server list
Image files can be transferred to the FTP server within the
scheduled time. Image file that has been recorded linked to an
external event is sent to the FTP server periodically.
> To add the FTP server
1. Click the [Add] button. FTP server setting window is
displayed.
2. Set the FTP server options.
- Alias: Type the FTP Server name to upload the image
files.
- Address: Enter the FTP server's IP address.
- Port: Enter the port number. The default FTP port is
21.
- User ID: Type the user name for the Folder shared in
the FTP server.
- Password: Type the password for the folder shared in
the FTP Server.
- Folder: Type the path with the folder that is shared in
the FTP server.
- Test: Select [Test] to test the FTP server.
3. Click the [Save] button to confirm the settings.
> To edit the FTP server
1. Choose the FTP server in the FTP server list.
2. Click the [Edit] button.
You can check or edit the FTP server options.
> To delete the FTP server
1. Choose the FTP server in the FTP server list.
2. Click the [Remove] button. This would remove the FTP
server from the list.
SMTP server list
By selecting the e-mail option, a still image of the event is captured
and an e-mail with the attached image file is sent to the specified
mail address.
> To add the SMTP server
1. Click the [Add] button. SMTP server setting window is
displayed.
2. Set the SMTP server options.
- Alias: Enter the SMTP server name.
- User ID: Enter the user ID of the SMTP server. This
would be the one who owns the mail account.
- Password: Enter the password of the SMTP server.
- Address: Enter the SMTP server address.
- Port: Enter the port number. The default port is 25.
19