Follow these brief instructions to prepare your eXplorist for use and
familiarize yourself with the features of the eXplorist found in the Basic
User Manual. After that you'll be ready to take on the great outdoors, with
the peace of mind found while using the eXplorist.
Charging the Battery: Connect the PC cable to
the back of the eXplorist. Connect the AC
adapter jack to the PC cable and then to an
AC wall outlet. The battery will begin
charging, even with the eXplorist turned off.
Full battery charging may take 4 hours.
Installing an optional SO card
Open the battery door and remove the LI-ION
battery, exposing the SO Card Cradle.
Lightly press on the SO Card Cradle Release
and the cradle will spring open.
SO Card
Cradle
Release
With the cradle open, slide the SO card in
to the cradle (shown in gray below). 00 NOT
lay the SO card flat in the battery
compartment as damage will occur when
closing the SO Card Cradle. Gently push the
SO card cradle back down until it locks into
place.
Put the LI-ION battery back in the battery
compartment and secure the battery door.
~~GELLA~
960 Overland Court, San Dimas, CA 91773
Tel: 909-394-5000
www.magellangps.com
Need help?
Do you have a question about the eXplorist and is the answer not in the manual?
Questions and answers