Magellan eXplorist Basic User Manual page 106

Auto·
User·
When the eXplorist is placed in the simulator mode, it simulates movement along a
predefi ned or saved route.
1. Press MENU.
2. Use the Arrow joystick to highlight Adv. Features.
3. Press ENTER.
4.
Use ttle Arrow joystick to highlight Simulate.
75
Communications
5. Press ENTER.
6. Highlight the desired option:
Off - Turns the simulator off
Auto - Uses a predefined route. (This is a 3-leg route in the shape of a triangle with
your present position as the starting point.)
User - Uses the same predefined route as Auto, but provides a way to change the
heading and speed. The simulator will follow the heading and speed, even when if
this means it doesn't follow the predefined route.
7. If you have an active track log being recorded, the simulator will need to delete this
track. A warning is displayed that your track will be deleted. Highlight Yes and
press ENTER to erase the track and continue.
8. An alert is displayed indicating that the simulator has been turned on. Press
ENTER.
9. Press NAV to return to the last viewed
Map
screen.
Simulating on a Saved Route
1. Follow the instructions above to turn the simulator on.
2. After you have returned to the last viewed Map screen, press MENU.
3. Highlight Routes.
4. Press ENTER.
5. Highlight a saved route to use. (Note: You will notice a new route whose name is
bolded indicating that it is the active route. This is the predefined route that the
simulator has created. Do not select this route if you are wanting to view a route
you have created.) Press ENTER.
6.
Highlight Activate Route.
7. Press ENTER.