Incline Arm Replacement - Vision Fitness S70-02 Service Manual

CHAPTER 5: PART REPLACEMENT GUIDE

5.20 Incline Arm Replacement

1) Remove the two screws holding on the cover where the incline arms meet the console mast, and remove the cover (Figure A).
2) Remove the 4 bolts that hold the incline arms to the console mast (Figures B).
FIGURE A FIGURE B
3) Remove the two bolts that connect the incline arm to the vertical stabilizer arm (Figure C). Then remove the incline arm.
FIGURE C
4) Reverse Steps 1-3 to install a new incline arm.
5) Test the Elliptical for function as outlined in Section 5.22.
46