Generator Replacement - Vision Fitness S70-02 Service Manual

5.4 Generator Replacement

1) Remove the shrouds as outlined in Section 5.1.
2) Remove the cable ties on the wire connector of the generator (Figure A).
3) Unplug the power cable connector of the generator (Figure B).
FIGURE A
4) Remove the screw and washer on the right side of the frame that keeps the generator from spinning freely (Figure C).
5) Remove the nuts and washers on the both sides holding the generator to the frame (Figure D).
FIGURE C
CHAPTER 5: PART REPLACEMENT GUIDE
FIGURE B
FIGURE D
23