Table of Contents
Advertisement
PA-46-350P, MALIBU
SECTION 7 - DESCRIPTION AND OPERATION (Continued)
(2) In addition, the Software Program VERsion will appear on the
Disclaimer Page, which will remain in view until any functional
push button is depressed. The current VERsion is 5.0.
(3) The intensity of the Argus 7000CE CRT and LED push buttons
may be adjusted by rotating the PUSH-ON knob. To remove
power to the Argus 7000CE, pull the PUSH-ON knob.
(4) The facilities and features desired for display on the Argus
7000CE may be selected in the unlabeled AMEND submode. To
activate the AMEND submode, depress the AUXiliary mode push
button for 5 seconds or, by three consecutive key strokes. These
may be selected during Predeparture, or at anytime the Argus
7000CE is in use when airborne.
b.
DEParture, ENRoute, and ARRival Procedures.
(1) The DEParture mode may be activated to observe the stationary
symbolic aircraft in the center of the Heading-up graphics screen
in respect to surrounding facilities. The ranges for the DEParture
mode are from 1 nm to 40 nm. The navigation information
displayed is with respect to GPS Great Circle calculations.
Graphics screen orientation is with respect to Gyroscopic
Directional heading or GPS Track.
(2) The ENRoute mode may be activated to observe the stationary
symbolic aircraft at 20 percent above the bottom of the Heading-Up
graphics screen. The ranges are from 1 nm to 240 nm. All other
navigation information is similar to that of the DEParture mode.
Graphics screen orientation is with respect to Gyroscopic
Directional heading or GPS track.
(3) The ARRival mode may be activated to observe a stationary
Magnetic North-up graphics screen, and a moving arrow, when the
range of the aircraft is beyond the selected or maximum range; or a
moving symbolic aircraft when the range of the aircraft is within the
ISSUED: FEBRUARY 23, 1999
SECTION 9
SUPPLEMENT 10
REPORT: VB-1710
5 of 8,
9-83
Advertisement
Table of Contents
