Running A Blood Glucose Test With Blood From Your Fingertip - EPS Bio Technology EasyMax NG User Manual

Running a Blood Glucose Test with Blood from Your Fingertip

1. Wash your hands with soap and
warm water. Rinse and dry
thoroughly. You can also use an
alcohol prep pad to clean the site.
If you are testing others, a new
pair of clean gloves should be
worn before testing each patient.
2. Put a test strip into the meter in the
direction of the arrow. The meter
turns on and the icon
automatically.
3. When the icons of
flashes on the display, the testing
mode of blood drop is starting.
4. Please wait at least 5 seconds
until the intended area is dry
shows and clean before using the
lancing device.
and 5. Position
and press it firmly against the
puncture site.
the lancing device
25