Running A Blood Glucose Test With Blood From Your Fingertip - EPS Bio Technology EasyMax Voice III Quick Reference Manual

Running A Blood Glucose Test With Blood From Your Fingertip

1. Wash your hands with soap
and warm water.
Rinse and dry thoroughly.
Put a test strip into the meter in the
2.
direction of the arrow. The meter turns
on. Press M button or C button to select
AC/PC mode and press power button to
confirm the setting.
3. When the blood drop flashes on the
display, the meter will tell the instruction.
4. Using the lancing device.
Hold the lancing device
firmly against the side of
your finger. Press the trigger
button. Then remove the
lancing device from your
finger.
9