Christie LX750 User Manual page 54

3. Management with Web browser software
3.8.4 COMMUNICATION GROUP / COMMUNICATION ID
When controlling some projectors in the DAISY CHAIN, to control a projector
individually or some projectors in a group simultaneously, set up the
COMMUNICATION GROUP and COMMUNICATION ID for each projector.
Use the COMMUNICATION GROUP menu and COMMUNICATION ID
menu to set up them. (
COMMUNICATION – COMMUNICATION GROUP / COMMUNICATION ID)
NOTE • The COMMUNICATION GROUP is set to A, and the
COMMUNICATION ID is set to the 1, as the default settings.
• To control some projectors individually, do not set up the same
COMMUNICATION ID to these projectors.
Alternatively, setting up the same COMMUNICATION ID to two or more
projectors intentionally realizes simultaneous control for these projectors, like
the coincident control with the COMMUNICATON GROUP.
3.8.5 Command for Daisy Chain control
For the command control of the DAISY CHAIN function, see the Technical
part of the Operating Guide. (
Communication)
LX750/LW650/LS+700 User Manual
020-000160-01 Rev. 1 (04-2009)
Operating Guide - OPTION menu - SERVICE –
Operating Guide - Technical – Daisy Chain
52
Network Guide