High-Voltage Power; Supply Pcb; Blank Spots - Canon LBP-860 Service Manual

Blank spots

E P - E c a r t r i d g e
High-voltage
5
power supply
I'CB
(Developing
DC controller
PCB.
Download Service Manual and Resetter Printer at http://printer1.blogspot.com
Is the recommended paper being used?
Is the transfer charging roller dirty or
deformed?
Does the print quality improve when
the cartridge Is replaced7
Perform a test print. About five seconds
after the main motor starts, does the
voltage between 5210.9 (SLOZ) and
PCB become about 0.76 VDC?
CHAPTER 6
Replace the paper. Instruct
the customer to wrap and
store the paper to prevent it
from becomlng damp.
YES Replace the
Y E S
Replace the cartridge.
Check whether the hlgh-
good contact with the
developing bias contact of
the cartridge. If it is. replace
the high-voltage power

supply PCB.

NO Replace the DC controller
PCB.