Table of Contents
Advertisement
Figure 3-42
4) Remove the two springs and open the
lower separation quide.
Release the hook holding the upper
and remove lhe upp?r fixing frame.
Figure 3-43
Download Service Manual and Resetter Printer at http://printer1.blogspot.com
5) Remove the screw and then the
thermistor.
Figure 3-44
Note for reassembly:
When installing the thermistor, make sure
that the sensing surface of the thermistor
contacts the surface of the upper fixing
roller uniformly. If it does not, check
whether the leaf spring is bent.
3-17
Advertisement
Table of Contents
Troubleshooting
