Canon LBP-860 Service Manual page 114

3. Disassembly and reassembly
a. Fixing roller heater
the two hooks holding the
contact cover. and remove the contact
Figure 3-36
wire rover to thr lixing unit with a Ilat-
Figure 3-37
Download Service Manual and Resetter Printer at http://printer1.blogspot.com
Remove the two screws. disconnect the
3)
connector, and remove the left futing
cover.
Figure 3-38
Remove the screw and then the fixing
4)
roller heater lead from the heater wire
Remove the fixing roller heater lead
5)
from the connector.
Screw
Connector
3 - 1 5