Canon LBP-860 Service Manual page 84

i
23
MEMORY FULL
27 JOB RE??ECT
28 MEMORY FULL
Download Service Manual and Resetter Printer at http://printer1.blogspot.com
Description
Download overflow
The pattern data memory overflowed
because there was too much pattern
data (downloaded data) for forming
user-defined characters [character font)
sent from the external device to the
printer.
Work memory overflow
The specified function cannot be
executed because of insufficient Internal
working "wnory (video controller).
Translator missing
The translator specitied by the
command from the external device does
not exist, or command parameters are
not correct.
Drawing working memory overflow
Since there are very complicated
graphics on one page. they may not be
printed correctly.
Take one of the following
Press the ON LINE key to
receive data from the
external device. The
overflow pattern data is
invalid.
Stop printing (see Section
V of Chapter 1). then enter
data again in online mode.
advise the customer to
unnecessary downloaded
data, etc.) or add an
optional RAM SIMM. If a
hard drive is installed, ask
the customer to switch the
power OFF, wait about two
seconds. switch the power
ON, then download data
again.
When the ON LINE key is
pressed, the error is
cleared. and the printer
accepts data from the
external device. However,
the function which
experienced a" error cannot
be executed. Check whether
a" optional RAM SIMM has
been installed. If not, advise
the customer to add a RAM
SIMM.
Press the ON LINE key so
the job in which the error
occurred 1s skipped. [The
document will not be
document will be printed.)
Then add the specified
translator or correct the
command.
Press the ON LlNE key to
continue processing.
Advise the customer to add
a" optional RAM SIMM.