Canon LBP-860 Service Manual page 132

If the boxed prinler is brought into the warm from a cold storeroom or delivery truck, condense-
lion will form on the printer surfaces. This will cause various problems, such as print defects. To
stop this happening, make sure you leave the printer in its box to gradually warm up to room
temperature before unpacking it. This will take al least an hour.
1. Unpacking
1 Open the box.
2 [ Take all the ancillary parts and
the documentation out.
Lift off the Styrofoam pads (right
and left), then lift the
4 Take the printer out of its plastic
bag. Peel off the tape holding the
5 Take the cassette out and remove
lifting plate retainer from the
cassette.
6 Open the printer and remove
the tape and the spacer
inside the printer.
7
Remove the packing material
holding the transfer charging
roller.
8 Open the multi-purpose tray
and remove the protective
sheet.
9 Open the delivery cover and
remove the sheet and the spacer.
Push the metal levers on both
Download Service Manual and Resetter Printer at http://printer1.blogspot.com
Check you have the following:
Power cord
l
Manual
l
Cartridge
l
printer
Figure 4-2
Check Remarks
Transfer charging roller