Finishing; Job Separation Printing - Konica Minolta PAGEPRO 4650EN User Manual

Finishing

When the optional offset tray is installed, job separation and offset printing
can be performed. For the installation procedure, refer to "Offset Tray" on
page 214. Settings for job separation and offset printing can be specified by
selecting
JOB SEPARATION
Use the following paper for job separation and offset printing.
Media Size
Paper is fed to the sub output tray with job separation and offset print-
ing.

Job Separation Printing

When paper is fed to the sub output tray, the pages are fed out shifted as
shown below.
To perform job separation printing, select
MENU/FINISHING
110
or
FINISHING
Width: 89 to 216 mm (3.5 - 8.5 inch)
Length: 140 to 356 mm (5.5 - 14.0 inch)
.
in .
PAPER MENU
in
SUB TRAY PAPER
Finishing