Installing The Lower Feeder Unit - Konica Minolta PAGEPRO 4650EN User Manual

Installing the Lower Feeder Unit

Note
Since consumables are installed in the printer, be sure to keep the
printer level when moving it in order to prevent accidental spills.
1
Turn off the printer and discon-
nect the power cord and inter-
face cables.
2
Place the feeder unit to be installed at the lower level on a flat location.
3
Lift up the feeder unit to be
installed at the higher level by
holding the parts as shown in the
figure.
Lower Feeder Unit
If you install only one lower feeder unit, proceed to Step 6.
209