Electrical Output Terminals; Tool Storage Tray/Battery Hold-Down - Arctic Cat 2010 400 H1 TRV Operator's Manual

Cruiser
CAUTION
Always replace a blown fuse with a
fuse of the same type and rating. If
the new fuse blows after a short
period of use, consult an authorized
Arctic Cat ATV dealer immediately.
ELECTRICAL OUTPUT
TERMINALS
Two output terminals for electrical
accessories are located on the front
wiring harness and one output terminal
for electrical accessories is located on
the rear wiring harness. The accessory
plug is located on the right side of the
instrument pod.
CAUTION
Always use electrical accessories
less than 180W.
84
TOOL STORAGE TRAY/
BATTERY HOLD-
DOWN
A basic tool kit is provided with the
ATV.
2411-081
Maintain the tool kit with the ATV at
all times.
The tool storage tray is located beneath
the seat. It also serves as the battery
hold-down.
CF157