Inter-Tel INT3000 User Manual page 70

To store a number in a Speed-Dial location:
Dial
1.
Dial the location code 0-9 to be programmed.
2.
Enter the desired name for the speed-dial number to be programmed, as described
3.
below:
•
Remain in alphanumeric mode: Press the dialpad buttons to enter the desired
characters. (Refer to the chart on
pressed determines which character is entered. For example, 533266 would
enter "JEAN." you need a FORWARD button to enter adjoining characters
that are located under the same button or to leave spaces. For adjoining char-
acters, press the FORWARD button once to advance to the next character.
For example, 66FWD6667776 would enter "NORM." (Note that letters cor-
respond to the letters printed on dialpad buttons 2-9.) Press BACKSPACE
to backspace.
NOTE:
ton (feature code 314) on your endpoint. Refer to
Feature Buttons section for details on how to program the backspace button.
To use the FORWARD, PREVIOUS, NEXT, or MSG button, your system
administrator must program those buttons in the Database programming.
•
Press
Dial the extension number or telephone number to be stored.
4.
•
Change to numeric mode: Press the MSG button (if you have one) and then
press the dialpad buttons to dial the desired numbers. Press
(-) or press
SPACE to backspace.
NOTE:
up and release), or a pause, press
pound, three times for a hookflash, or four times for a pause. (Each pause or
hookflash counts as one digit.) You can enter more than one special character
in a row by pressing
•
Press
NOTE:
To dial outside telephone numbers without first selecting an outgoing line, enter
a line access code (such as the Outgoing Call code "8") before the outside telephone
number.
To view the current programming of Station Speed-Dial buttons:
Dial
1.
Press the Station Speed-Dial button to be viewed.
2.
Press
3.
58
.
3 8 3
To use the Backspace button, you must pre-program the feature but-
to save the name.
#
for a colon, FORWARD to leave a space, or BACK-
*
If your number includes an asterisk, pound, a hookflash (a quick hang
FORWARD
to save the number.
#
.
3 6
9
to exit.
#
page 65.) The number of times a button is
page 62
SPCL once for an asterisk, twice for a
between the characters.
Inter-Tel
, Programming Your
for a hyphen
#
®
INT3000 User Guide