System Speed Dialing - Inter-Tel INT3000 User Manual

To program a user-programmable function button as a Station Speed-Dial but-
ton:
Dial
1.
Press the feature button you want to change into a Station Speed-Dial button.
2.
Dial
3.
Dial a digit 0-9 when the display asks for a number. This is the station speed-dial
4.
number "location."
NOTE:
as the SYS SPD feature button found on some endpoints.
To erase a station speed-dial name and/or number:
Dial
1.
Dial the location code (0-9) to be erased.
2.
To remove the name: Press BACKSPACE repeatedly until the name is erased.
3.
Press
4.
To remove the number: Press BACKSPACE repeatedly until the number is
5.
erased.
Press
6.
NOTE:
Backspace button (feature code 314) on your endpoint. Refer to
ming Your Feature Buttons section for details on how to program the backspace
button.
To dial a Station Speed-Dial number:
Select an outgoing line by pressing
1.
Dial
2.

System Speed Dialing

Your system administrator can store up to 1000 speed-dial numbers in System Speed-
Dial locations 000-999.
To view and/or dial system speed-dial numbers:
Dial
1.
Dial the location code (000-999) for the desired number. The number appears.
2.
Press
3.
®
Inter-Tel INT3000 User Guide
.
3 7
9
(default Station Speed Dial feature code).
3 8 2
Station Speed-Dial buttons created using this procedure are not the same
.
3 3
8
to continue.
#
to exit.
#
To erase a station-dial name and/or number, you must pre-program the
and then the desired station speed-dial location number (0-9).
3 8 2
3 8 1
to dial the number.
#
.
call 1-4
page 62
, Program-
59