Proprietary Notice; Safety; Safe Environment - DataCard ImageCard series Manual

ImageCard/UltraGrafix (Express and Select Classes) User's Guide
acceptance of this system you hereby assume all liability consequent to your
use or misuse of this equipment. DataCard Corporation assumes no liability
for incidental, special or consequential damage of any kind. Equipment
specifications, applications and options are subject to change at the sole
discretion of DataCard Corporation without notice.

Proprietary notice

All drawings and information herein are the property of DataCard
Corporation. All unauthorized use and reproduction is prohibited.
Copyright © 1997, 1998, 1999. All rights reserved.

Safety

All DataCard products are built to strict safety and reliability specifications
in accordance with Underwriters Laboratories Inc. and Canadian Standards
Association requirements. Therefore, safety issues pertaining to operation
and repair of DataCard equipment are primarily environmental and human
interface.
The following basic safety tips are given to ensure safe installation, operation
and maintenance of DataCard equipment and are not to be considered as
comprehensive on all matters of safety.

Safe environment

•
•
•
•
•
•
•
Connect equipment to a grounded facility power source. Do not defeat
or bypass the ground lead.
Place the equipment on a stable surface (table or floor), and ensure floors
in the work area are dry and non-slip. Insulated rubber floor mats are
preferred.
Know the location of equipment branch circuit interrupters or circuit
breakers and how to turn them on and off in case of emergency.
Know the location of fire extinguishers and how to use them. Only ABC
type extinguishers may be used on electrical fires.
Know local procedures for first aid and emergency assistance at the
customer facility.
Use adequate lighting at the equipment.
Maintain the recommended range of temperature and humidity in the
equipment area.
A-3