Accessing Printer Features; Using The Printer Properties Dialog Box - DataCard ImageCard series Manual

3-2
Day-to-day printer use

Accessing printer features

You can check the status of the printer and change settings that affect how
the printer works from the following windows:
•
•
•
This section describes how to open and use these windows.

Using the printer properties dialog box

The printer properties dialog box contains many of the controls for the
printer, including card-printing parameters and settings for magnetic stripe
and smart card encoding.
Printer properties window
Default document properties window (Windows NT only)
Status monitor
1.
Click on the Start button in the Windows taskbar.
2.
Select Settings and then Printers (see Figure
window appears.
3.
Click once on the printer driver icon (see Figure
(The icon has the name chosen during installation.)
4.
Select File from the Printers menu, and then select Properties (see
Figure if you are using Windows 95/98 or Figure
3:-2
Windows NT). The printer's Properties window appears.
5.
Select values and change settings as you wish.
6.
When you are done, click on the OK button to save your changes, or
on the Cancel button to exit without saving.
). The Printers
3:-1
3:-2
!
or Figure ).
3:-3
for
3:-3