4036-310, -311
The following menus are accessed from a scanner at the ready state:
Menu
SE menu
Network SE menu
3-8
Service Manual
Steps
At the scanner, perform the following steps:
1. From the Admin menu, navigate to the home
screen.
2. Press the button sequence: * * 4 1 1
3. The SE Menu appears.
At the scanner, perform the following steps:
1. From the Admin menu, navigate to: Network/
Ports > Standard Network > STD Network
Setup menu.
2. Press the button pattern below:
3. Release the buttons when the Network SE
Menu appears.
Description
This enables the SE menu.
This enables the Network SE
menu.
Previous
Next
Go Back