Diagnostics Mode; Diagnostic Mode Menus - Lexmark 6500e Service Manual

Diagnostics mode

To run the diagnostic tests described in this chapter, put the scanner in Diagnostics mode. Additional printer
diagnostics are available in the printer Diagnostic mode accessible from the printer user interta.

Diagnostic mode menus

REGISTRATION
Top Margin
Bottom Margin
Left Margin
Right Margin
Quick Test
SCANNER CALIBRATION
Copy Quick Test
Print Testcase
Adjust Calibration Values
Reset Flatbed Calibration Values
Reset ADF Front Calibration Values
Reset ADF Back Calibration Values
PRINT TESTS
Tray 1
Tray 2 (if installed)
Tray 3 (if installed)
Tray 4 (if installed)
Tray 5 (if installed
Multi-Purpose Feeder
Print Quality Pages
Use this menu to adjust printer margins.
Note: See Scanner Manual
Registration in the Configuration Menu
to adjust the scanner registration
settings.
See "SCANNER CALIBRATION" on page
See "PRINT TESTS" on page
See "Print Quality Pages" on page
4036-310, -311
Previous
Go Back
3-17.
3-17.
3-18.
3-15
Diagnostic aids
Next