Left Side - HCL Notebook PC User Manual

User's Guide

Left Side

Refer to the diagram below to identify the components on this side of the
Notebook PC.
1.Memory Card Reader (9-in-1)
This Notebook PC has a built -in high-speed memory card reader that can
conveniently read from and write to many flash memory cards (9 in 1 -
MS, MS Pro, MS Pro-HG Duo, SD, SDXC, MMC, xD Picture Card.
used in devices such as digital cameras, MP3 players, mobile phones,
and PDAs.
2. USB Ports (3.0)
The USB (Universal Serial Bus) ports are compatible with USB 3.0 devices such as keyboards, pointing devices, cameras,
hard disk drives, printers, and scanners connected in a series up to 4.8Gbits/sec (USB 3.0). USB allows many devices to
run simultaneously on a single computer, with some peripherals acting as additional plug-in sites or hubs. USB supports
hot-swapping of devices so that most peripherals can be connected or disconnected without restarting the computer
3. Air Vents
The air vents allow cool air to enter and warm air to exit the Notebook PC.
Important:
Make sure that Paper, books, clothing, cables or other objects do not block any of the air vents or else overheating may occur.
4. HDMI Port
HDMI (High-Definition Multimedia Interface) is an uncompressed all-digital audio/video interface between any audio/video
source, such as a set-top box, DVD player, and A/V receiver and an audio and/or video monitor, such as a digital television
(DTV). Supports standard, enhanced, or high-definition video, plus multi-channel digital audio on a single cable. It transmits
all ATSC HDTV standards and supports 8-channel digital audio.
Note:
The HDMI port does not provide simultaneous audio and video output when transmitting to an external device. In such instances only the video
signal will be transmitted.
Knowing the Parts
2-5