Using The External Audio System - HCL Notebook PC User Manual

User's Guide
1. If you only want to show the display on the external monitor or projector and shut off the LCD display, you can use the
<Fn> + <F7> hot-key to switch display type between LCD and external monitor. Keep pressing the hot -key until you get
the display to external monitor only.

Using the External Audio System

At the right side of your computer, you will find the built -in audio ports. You can connect Microphone jacks, earphone or
powered speaker.
To connect to a audio jack:
1. Locate the audio port (Microphone, Headphone) that you want to use to the target device.
2. Plug the jack into the port on the right side of the system.
Note:
If you use external speakers and experience the sound distortion or feedback, please lower the volume. Some factors is caused by too close
locating the microphone and speakers from each other, moving away the external audio option from the unit may also help.
Using the Notebook PC
4-20