HCL Notebook PC User Manual page 44

User's Guide
If you have included an PCIe Wireless LAN card make sure that the Wireless LAN module is on before installing the driver.
Use the Fn + F11 key combination to toggle power to the Wireless LAN module. Make sure you install the drivers in the
order indicated.
Warning:
Wireless Device Operation Aboard Aircraft: The use of any portable electronic transmission devices aboard aircraft is usually prohibited. Make
sure the module(s) are OFF if you are using the computer aboard aircraft. Use the Fn + F2 key combination to toggle power to the WLAN module,
and check the indicator to see if the module is powered on or not (or) use aeroplane hot key to switch off Wireless and Bluetooth simultaneously.
Connecting to a Wireless Network
Make sure the Wireless LAN module is turned on.
1. With the use of function key (Fn+F11) Turn ON the WLAN then click the taskbar WLAN
icon , and then click Connect to a network (or right click the icon
Connect to a network).
2. In the Show list, click to choose Wireless from the drop-down menu.
3. A list of currently available networks will appear.
Using the Notebook PC
, and then click
4-15