HCL Notebook PC User Manual page 38

User's Guide
Optical Drive (Cont')
1. Hole the disc by the edge and face the disc's
printed side up. Push down on both sides of the
disc's center until the disc snaps onto the hub.
The hub should be higher than the disc when
correctly mounted.
Note:
It is normal to hear as well as feel the Media spinning with great intensity in the Optical drive while data is read.
2. Slowly push the drive's tray back in. The drive
will begin reading the table of contents (TOC) on
the disc. When the drive stops, the disc is ready
to be used.
Using the Notebook PC
4-9