HCL Notebook PC User Manual page 57

User's Guide
Problem
You forget the boot
password.
Warning:
If you choose to set a boot password, (If supported) NEVER forget your password. The consequences of this could be serious.
The sound cannot be heard
or the volume is very low.
The system never goes into
a power saving mode.
The Wireless LAN modules
cannot be detected.
Possible Cause - Solution
If you forget the password, you may have to discharge the battery of the CMOS.
Contact your service representative for help.
The volume might be set too low. Check the volume control in the Volume Control
Panel in the Windows taskbar, or use the key combination Fn+ F6
Power Options features are not enabled. Go to the Windows Power Options menu
and enable the features you prefer. Make sure you have enabled Hibernate mode
from the control panel.
The modules are off. Check the LED indicator and/or function key indicator to see if
the WLAN switch is on or off. If the LED indicator is off, then press the Fn + F11
(WLAN) key combination(s) in order to enable the modules.
Troubleshooting
key.
5-6