FrameMaker Ver.5.5E(PC) Di151 TROUBLESHOOTING
00.03.10
(3)
Low image density
Section
Step
1
Toner has run out.
2
The image transfer current ter-
minal is dirty.
3
The Image Transfer Roller is
deteriorated.
4
The developing bias terminal
Engine
is dirty.
5
The Regulator Blade terminal
is dirty.
6
Image density is still low even
after the I/C has been
changed.
1
Wiring between the Scanner
and Control Board is con-
IR
nected.
(4)
Foggy background
Section
Step
1
Extraneous light has entered
—
the copier.
1
PC Drum is contaminated with
foreign matter.
2
Drum charge voltage terminal
is dirty.
3
Regulator Blade terminal is
Engine
dirty.
4
Seal bias terminal is dirty.
5
Foggy background still occurs
even after the I/C has been
changed.
1
Mirrors and lens are dirty.
2
Exposure Lamp is dirty.
IR
3
Wiring between the Scanner
and Control Board is con-
nected.
Check
Result
YES Change I/C.
YES Clean.
YES Change.
YES Clean.
YES Clean.
YES Change High Voltage Unit.
YES Change Scanner.
NO
Check
Result
YES Protect copier from extrane-
YES Clean.
YES Clean.
YES Clean.
YES Clean.
YES Change High Voltage Unit.
YES Clean.
YES Clean.
YES Change Scanner.
NO
T-21
Action
Change PH Unit.
Change Master Board.
Change Control Board.
Connect.
Action
ous light.
Change PH Unit.
Change Master Board.
Change Control Board.
Connect.